manualshive.com logo in svg

Wacker Neuson 2503, Руководство оператора, Страница: 49 / 280

Поделиться
Скачать
Wacker Neuson 2503 Скачать руководство пользователя страница 49

OM 25-3503 us – Edition 4.1  * 2503_3503b210_us.fm 

2-9

Safety instructions

Shatter protection (Option)

The optional shatter protection protects the operator against material falling from the front.

WARNUNG

DANGER

Stabbing/puncture/crushing hazard from falling objects 

(fragments or splinters) projected from front of machine.

Objects will cause serious or deadly injuries.

• When working in areas with a risk of falling or projected objects, an operator 

safety shield must be installed (option equipment).

• Machine operation is prohibited under these conditions without the operator 

safety shield installed.

WARNUNG

WARNING

W

Personal injury hazard! Do not modify the shatter protection.

Failure to follow this precautionary measure can lead to severe injury or death.

• No drilling, cutting or grinding.
• Do not mount any brackets.
• Do not perform any welding/bonding work.
• Replace the complete protective structure if it is damaged, deformed and/or 

cracked.

• If you are not sure, always contact a Wacker Neuson dealer.
• Repair work may be performed by a Wacker Neuson dealer only.

Important

Do not use brushes, steel wool or other abrasive cleaners for cleaning the 
polycarbonate disc. Do not wipe dust in a dry state.

Work range and restricted visibility

WARNUNG

WARNING

W

Accident hazard! The size of the work range depends on the 

attachment used.

Risk of injury.

• – see Operator’s Manual of attachment 

– see example: work range with hydraulic hammer 

Fig. 72

• Do not use the attachment outside the defined work range.

NOTICE

Stop working when visibility is restricted due to rain, snowfall, dust etc.

☞

Resume work only if visibility is no longer restricted.

0°

70°

70°

120 cm
(47 in)

Fig. 72: Example: work range with hydraulic hammer

Содержание 2503

























































































































































































































































































Отзывы:

Нет отзывов