Wacker Neuson 2503 Скачать руководство пользователя страница 163

Страница: 163 / 280

OM 25-3503 us – Edition 4.1 * 2503_3503b340.fm

3-103

Operation

3.58 Working with the excavator

Inadmissible work procedures

Working with the swivel force

☞

Do not use the swivel force of the upper carriage to tear down walls or to create level
surfaces.

☞

Never ram the attachment into the ground when swiveling the upper carriage.

➥

This can damage the machine and/or the attachment.

Working with the drive force

☞

Never ram the attachment into the ground to dig during machine travel.

➥

This can damage the machine and/or the attachment.

Working with the falling force by lowering the bucket

☞

Do not use the falling force of the attachment as a hoe, hammer or pile-driver.

➥

This can damage the machine and/or the attachment.

Fig. 240: Working with the swivel force

Fig. 241: Working with the drive force

Fig. 242: Working with the falling force by lowering the bucket

Содержание 2503

























































































































































































































































































Результаты поиска

Содержание 2503

Отзывы:

Wacker Neuson 2503, Руководство оператора, Страница: 163 / 280

Результаты поиска

Содержание 2503

Отзывы: