manualshive.com logo in svg

Wacker Neuson 2503, Руководство оператора, Страница: 248 / 280

Поделиться
Скачать
Wacker Neuson 2503 Скачать руководство пользователя страница 248

6-18

OM 25-3503 us – Edition 4.1 * * 2503_3503b610.fm

Technical datac

Safety instructions stability tables

The values of the stability table (load diagram) apply to lifting gear applications.

DANGER

Crushing hazard due to tipping over of machine!

The machine causes serious injury or death when it tips over.

• Never exceed the weight and mass values specified in the stability table.
• If a joint rod or Powertilt unit with load hook is installed, the weight of the 

attachment must be subtracted from the weight or mass value specified 
in the table.

• Use the machine for lifting gear applications only if the mandatory lifting 

gear and safety equipment is installed, functional and enabled.

• Lock the oscillating axle in work position.

Information!

If the weight or mass value is exceeded, there is a risk of damage to property if the 
machine tips over.
• Never exceed the weight and mass values specified in the stability table.

Information!

The indications are only approximate values. Attachments, uneven ground and 
soft or bad ground conditions affect stability, and the weight and mass values. The 
operator must take these influences into account.

Содержание 2503

























































































































































































































































































Отзывы:

Нет отзывов