manualshive.com logo in svg

Wacker Neuson 2503, Руководство оператора, Страница: 39 / 280

Поделиться
Скачать
Wacker Neuson 2503 Скачать руководство пользователя страница 39

OM 25-3503 us – Edition 4.1 * 2503_3503b110.fm

1-27

Introduction

Meaning (option)

Remove the shatter protection if the machine is transported on an open platform.

Location

On the shatter protection at the upper left in travel direction.

1.11 Fire extinguisher

The fire extinguisher is neither included in the machine’s standard equipment nor is it 
available as an option from Wacker Neuson.
A fire extinguisher according to DIN-EN 3 must be installed by a Wacker Neuson service 
center.
A bracket for the fire extinguisher must be fastened on the C pillar on the left (for the cabin 
and the canopy).

Information!

Ensure that the fire extinguisher is secured and firmly fastened. Check the fire 
extinguisher at regular intervals, also ensure that it is safely installed. Observe 
the manufacturer’s indications.

Fig. 70: Removing the shatter protection

Fig. 71: Fire extinguisher (symbolic representation)

Содержание 2503

























































































































































































































































































Отзывы:

Нет отзывов