manualshive.com logo in svg

Wacker Neuson 2503, Руководство оператора, Страница: 191 / 280

Поделиться
Скачать
Wacker Neuson 2503 Скачать руководство пользователя страница 191

OM 25-3503 us – Edition 4.1 * 2503_3503b510.fm

5-9

Maintenance

Checking the coolant level

☞

Proceed as follows:

•Park the machine on level ground
•Stop the engine! 
•Raise the control lever base
•Remove the key and carry it with you
•Let the engine and the coolant cool down
•Open the engine cover
•Tier III: Check the coolant level on the transparent coolant reservoir 

A

 and on 

the

 

radiator

☞

If the coolant level is below the 

LOW

 seam or if there is no coolant at the radiator’s 

filler inlet:

➥

Add coolant

•Tier IV: check the coolant level on sight glass 

B

☞

If the coolant level is below the 

FULL 

mark:

➥

Add coolant

Information!

Check the coolant level once a day.
We recommend checking it before starting the engine.

NOTICE

Do not mix the coolant with other coolants.

•

Use only the coolant prescribed by Wacker Neuson

– see chapter 5.16

 Fluids and lubricants

 on page 5-35.

Fig. 271: Coolant reservoir

FULL

LOW

A

Fig. 272: Radiator

B

FULL

Содержание 2503

























































































































































































































































































Отзывы:

Нет отзывов