manualshive.com logo in svg

Wacker Neuson 2503, Руководство оператора, Страница: 111 / 280

Поделиться
Скачать
Wacker Neuson 2503 Скачать руководство пользователя страница 111

OM 25-3503 us – Edition 4.1 * 2503_3503b330.fm

3-51

Operation

Weight adjustment

Information!

Adjust the seat suspension correctly to ensure a high level of ride comfort. Use 
the lever to adjust the seat suspension.
Adjust the seat only without load!

Adjust the seat to the driver’s weight as follows:

➥

Less spring action:

☞

Press the lever down.

➥

More spring action:

☞

Press the lever up.

Horizontal adjustment

☞

Sit down on the operator seat

☞

Pull lever 7 upward and at the same time

☞

Move the seat forward or backward

Backrest adjustment 

☞

Sit down on the operator seat.

☞

Pull handle 10 forward and at the same time

☞

Lean back to push the backrest into the required position

☞

Release handle 10

 

and allow it to lock into place

Fig. 133: Weight adjustment

29

Fig. 134: Horizontal seat adjustment

7

Fig. 135: Backrest adjustment

10

Содержание 2503

























































































































































































































































































Отзывы:

Нет отзывов