manualshive.com logo in svg

Wacker Neuson 2503, Руководство оператора, Страница: 207 / 280

Поделиться
Скачать
Wacker Neuson 2503 Скачать руководство пользователя страница 207

OM 25-3503 us – Edition 4.1 * 2503_3503b530.fm

5-25

Maintenance

5.13 General maintenance

Cleaning

Cleaning the machine is divided into 3 separate areas:
• Inside the cabin
• Exterior of the machine
• Engine compartment
The wrong choice of cleaning equipment and agents can impair the operating safety of the 
machine on the one hand, and on the other undermine the health of the persons in charge 
of cleaning the machine. Therefore always observe the following instructions.

General instructions for all areas of the machine

Cleaning with washing solvents

• Ensure sufficient room ventilation
• Wear suitable protective clothing
• Do not use flammable liquids, such as gasoline or diesel

Cleaning with compressed air

• Work carefully
• Wear safety glasses and protective clothing
• Do not aim the compressed air at the skin or at other people
• Do not use compressed air for cleaning your clothing

Cleaning with a high-pressure cleaner or steam jet

• Electrical components and damping material must be covered and not directly exposed to the 

jet

• Cover the vent filter on the hydraulic oil reservoir and the filler caps for fuel, hydraulic oil, etc.
• Protect the following components from moisture:

•Engine
•Electrical components such as the alternator, etc.
•Control devices and seals
•Air intake filters, etc.

Cleaning with volatile and easily flammable anticorrosion agents 
and sprays:

• Ensure sufficient room ventilation
• Do not use unprotected lights or open flames
• Do not smoke!

Содержание 2503

























































































































































































































































































Отзывы:

Нет отзывов