manualshive.com logo in svg

Wacker Neuson 2503, Руководство оператора, Страница: 198 / 280

Поделиться
Скачать
Wacker Neuson 2503 Скачать руководство пользователя страница 198

5-16

OM 25-3503 us – Edition 4.1 * * 2503_3503b520.fm

Maintenance

Adding hydraulic oil

Warning!

WARNING
Injury hazard when removing the filler plug!

Can cause serious injury or death.

•

Carefully unscrew the plug to slowly reduce the pressure inside the reservoir.

The hydraulic oil reservoir is located under the valve cover. Do not add hydraulic oil unless 
the engine is stopped. Otherwise, hydraulic oil will overflow at the filler opening on the 
hydraulic oil reservoir.

☞

Add as follows:

•Park the machine on level ground
•Retract the bucket and boom cylinders, lower the boom and the bucket teeth 
to the ground
•Lower the stabilizer blade to the ground
•Set the boom straight (swiveling cylinder)
•Release the pressure in the operating hydraulics 

– see chapter

 Releasing 

pressure

 on page 3-88.

•Stop the engine, remove the starting key and carry it with you
•Raise the control lever base
•Let the engine cool down
•Slowly open cap 

C

 of the hydraulic reservoir

With the filter insert in place:

•Add hydraulic oil
•Check the hydraulic oil level on sight glass 

B

•Add if necessary and check again
•Close cap 

C

 of the hydraulic reservoir hand tight again

Fig. 280: Hydraulic oil reservoir

C

Fig. 280: Parking the excavator

Fig. 281: Oil level indicator on the hydraulic oil reservoir

B

MIN

MAX

Содержание 2503

























































































































































































































































































Отзывы:

Нет отзывов