manualshive.com logo in svg

Wacker Neuson 2503, Руководство оператора, Страница: 177 / 280

Поделиться
Скачать
Wacker Neuson 2503 Скачать руководство пользователя страница 177

OM 25-3503 us – Edition 4.1 * 2503_3503b410.fm

4-3

Malfunctions

4.1 Malfunctions of the Powertilt unit

NOTICE

Contact a Wacker Neuson service center in case of malfunctions or signs that 
are not listed in the following tables

 

or that persist after maintenance has been 

performed correctly.

Problem

Possible causes

See

Powertilt does not maintain its position.

If the excavator applies too much pressure against an obstacle, this 
can build up pressure in the Powertilt swivel device that activates 
the internal decompression valve.

Oil escapes from the control valve.

Malfunctioning decompression valve.

Oil escapes from the seals.

Powertilt turns only in one direction.

Malfunctioning internal decompression valve.

Both lines are connected to either the P1 or P2 connections of the 
Powertilt swivel device.

Inexact lateral Powertilt movements.

Air in Powertilt swivel device or hydraulic system.

Hose/pipe diameter/length is larger/longer than recommended.

Reverse and forward movement of shaft in housing (axial 
play of shaft).

Worn or missing pressure disks.

Lateral bucket movement.

A little play due to necessary spacing between teeth is normal.

Grease cannot be applied to Powertilt grease zerks.

Malfunctioning grease decompression valve of lubrication system, 
or grease decompression valve has been replaced by a grease zerk 
or plug.

Содержание 2503

























































































































































































































































































Отзывы:

Нет отзывов