ViaSat 8116 Series, Инструкция по установке и эксплуатации

Страница: 21 / 188

LOWER MOUNT INSTALLATION PROCEDURES
WARNING
__________________________________________
Avoid shorting circuits when using metal tools.
Some circuits have high current capability
which, when shorted, will flash and may cause
burns and/or eye injury.
Remove all jewelry and exposed metal objects
from body and clothing before performing
maintenance, adjustments, and/or
troubleshooting. Before working inside the
equipment, remove all power, unless power is
required to perform procedures. Do not replace
parts with power on.
Replacement of fuses or other parts must be
done using identical types and ratings.
Substitution of non-identical parts may cause
safety and fire hazards.
Servicing this equipment may require working
with protective covers removed and ac power
connected. Extreme caution must be exercised
during these procedures.
Death or severe injury may result if personnel
fail to observe safety precautions.
__________________________________________
Personnel working with or near hazardous chemicals or voltages
should be familiar with modern methods of resuscitation.
Resuscitation
Tables 2-1 through 2-4 list the tools and equipment needed for
installing ViaSat’s 16 or 18 meter antenna. Table 2-1 is a list of
hand tools. Table 2-2 is a list of on-site requirements such as
cranes, steel chokers, and an air compressor. Table 2-3 is a list of
precision items required such as a theodolite and level. Table 2-4
is a list of installation aids, rigging, and expendable items such as
air wrenches, slings, ladders, and safety items, some of which may
be available at the site.
RECOMMENDED
TOOLS AND
EQUIPMENT
____________________________________________________________________________________________
42S183D
SERIES 8116/8118 16-/18-METER EARTH STATION ANTENNA
2-5