ViaSat 8116 Series, Инструкция по установке и эксплуатации

Страница: 95 / 188

INSTALLATION OF REFLECTOR, SPARS, SUBREFLECTOR, AND FEED
____________________________________________________________________________________________
11. Attach two intercostals #2D (item 10) from center of item 2A toward
bolt location of item 1A using hex head bolt (item 100), flat washer
(item 101), and hex nut (item 102) at truss end, and two bolts (100),
four washers (101), and two nuts (102) at node end.
12. Attach intercostal #3A (item 11) to inside of attaching tabs (third
attachment location from hub) at top of truss using two hex head bolts
(item 103), four flat washers (item 104), and two hex nuts (item 105)
in each end.
13. Attach intercostal #3B (item 12) to inside of attaching tabs
(underneath 3A) at bottom of truss using two hex head bolts (item
103), four flat washers (item 104), and two hex nuts (item 105) in
each end.
14. Attach two intercostals #3C (item 13) from center of item 3A to bolt
location of item 3B using one hex head bolt (item 103), two flat
washers (item 104), and one hex nut (item 105) in each end.
15. Attach two intercostals #3D (item 14) from center of item 3A toward
bolt location of item 2A using hex head bolt (item 100), flat washer
(item 101), and hex nut (item 102) in each end.
16. Attach node 4 assembly (item 22) to inside of attaching tabs (fourth
attachment location from hub) at top of truss using two hex head bolts
(item 103), four flat washers (item 104), and two hex nuts (item 105)
in each end.
17. Attach intercostal #4B (item 15) to inside of attaching tabs at bottom
of truss using two hex head bolts (item 103), four flat washers (item
104), and two hex nuts (item 105) in each end.
18. Attach two intercostals #4C (item 16) from center of item 4A to bolt
location of item 4B using one hex head bolt (item 103), two flat
washers (item 104), and one hex nut (item 105) in each end.
19. Attach two intercostals #4D (item 17) from center of item 4A toward
bolt location of item 3A using hex head bolt (item 100), flat washer
(item 101), and hex nut (item 102) at truss end, and two bolts (100),
four washers (101), and two nuts (102), at node end.
20. Attach node 5 assembly (item 18) to inside of attaching tabs (fifth
attachment location from hub) at top of truss using two hex head bolts
(item 103), four flat washers (item 104), and two hex nuts (item 105)
in each end.
21. Attach two intercostals #5C (item 19) from center of item 5A to bolt
location of item 4B using hex head bolt (item 100), flat washer (item
101), and hex nut (item 102) in each end.
22. Attach two intercostals #5D (item 17) from center of item 5A toward
bolt location of item 4A using hex head bolt (item 100), flat washer
(item 101), and hex nut (item 102) at truss end, and two bolts (100),
four washers (101), and two nuts (102), at node 5A end.
____________________________________________________________________________________________
42S183D
SERIES 8116/8118 16-/18-METER EARTH STATION ANTENNA
4-5