ViaSat 8116 Series, Инструкция по установке и эксплуатации

Страница: 50 / 188

LOWER MOUNT INSTALLATION PROCEDURES
2. Pour grout into a five gallon bucket (0.019 cubic meter) or equivalent
mixing container and slowly add water. Stir the mix and add grout or
water as required to obtain a good paste.
NOTE
Be sure to mix enough grout to complete each pad (or bottom
plate) at one time. Once the grout begins to set, new grout will
not bond to the old grout.
3. Starting on one side of each base plate, use a small strip of wood to
work the grout between base plate and foundation. It is important that
the grout be worked from one side to the other to prevent air from being
trapped under each plate. Once the area under the plate is full of grout,
smooth the edges around each plate for best appearance.
4. Immediately after the grout is installed, cover all exposed grout with
clean wet rags (do not use burlap). Keep the rags moist for at least two
hours.
____________________________________________________________________________________________
2-34
SERIES 8116/8118 16-/18-METER EARTH STATION ANTENNA
42S183D