Tuttnauer 2301006, Руководство по эксплуатации и техническому обслуживанию

Страница: 98 / 122

Page 93 of 117 pages
11.10 Door Piston Oil Tank
11.10.1 Checking Oil Level
To check if the oil content in the tank is as required perform the following:
Open the door to the lower position.
Verify that when the door is open, the oil content in the oil tank is 80% of full
capacity.
If the oil content in the tanks is below or over the required quantity add or
remove oil according to the following instructions:
11.10.2 Adjusting Oil Quantity
1. When the door is in “open” position disconnect the compressed air supply to
the autoclave (1).
2. Add oil through the oil filling plug (2) or remove oil from the tank using the
drain manual valve (3).
3. Close well the drain valve and filling plug (as appropriate).
4. Reconnect the compressed air supply.
5. Close and open the door 5 – 10 times in order to drain air from the system.
Attention:
Do not stand close to the door while reconnecting the compressed air
supply to the autoclave.