Tuttnauer 2301006, Руководство по эксплуатации и техническому обслуживанию

Страница: 8 / 122

Page 3 of 117 pages
The keyboard located on the front panel enables the operator to start and stop the
cycle.
Only the responsible person has access to select the program and change the
major parameters by using the key.
Optionally, a personal computer can be connected to the control system, through the
interface board RS232, which can be, operated 8 meters away from the autoclave.
The PC, operating under WINDOWS displays the status, data and processing in real
time in graphic and digital form at the same time recording and logging the data.
The communication PC-control unit enables the complete control of the autoclave
through the PC, including program selection, starting and stopping the cycle, setting
of parameters and the real time clock (data and time of the day).
1.2 Standards
This autoclave meets applicable requirements of the following standards:
1. A.S.M.E. Code, Section VIII Division 1 for unfired pressure vessels.
2. HTM 2010 – Sterilization and HTM 2031 - Clean Steam for Sterilization.
3. Complies with AAMI/ANSE ST8- Hospital Steam Sterilizers.
4. Complies with Underwriters Laboratories (U.L 2601-1) requirements
Tuttnauer is approved for ISO 9002 (Quality Systems), EN 46002 (Quality
Systems for Medical Devices) and ISO 13488 (Quality systems for Medical
devices – Particular
requirements for the application of ISO 9002).
.