Tuttnauer 2301006, Руководство по эксплуатации и техническому обслуживанию

Страница: 80 / 122

Page 75 of 117 pages
10. PRINTER
10.1 Printer Operation
The autoclave is equipped with a character printer, which prints
a detailed history of each cycle performed by the instrument (for
the record or for subsequent consideration).
The printing is made on thermal paper with 24 characters per
line and contains the following information:
♦
Software version (is printed only on Power Dn)
♦
Real time
♦
Selected program
♦
Sterilization pressure
♦
Sterilization temperature
♦
Sterilization time
♦
Summary of performed cycle and identification hints.
When the sterilization cycle begins the printer starts printing the
above data.
After the preliminary printing, the autoclave starts performing the
sequence of operations of the cycle. The measured values of
temperature and pressure are printed at fixed time intervals,
according to the phase of the process, as shown in the table
below.
The data is printed from the bottom up, beginning with the date
and ending with “O.K.” for a complete cycle or “FAIL” for an
aborted cycle.
For an example of a typical printout, see next page.