TransCore SmartPass AI1611, Системное руководство

Страница: 170 / 179

Commands
Reader message:
Done
695 Set Serial Number
Command 695 assigns the reader serial number according to the format:
695SSSSSS
where
SSSSSS
is the serial number
The serial number may contain up to 6 ASCII alphanumeric characters. The factory
default serial number is 000000. Once assigned, the serial number will be preserved
during power down and the loading of default parameters.
Uppercase or lowercase characters are allowed for SSSSSS.
Reader message:
Done
696S...S Store Hardware Configuration String
Command 696S...S stores hardware configuration information into reader memory.
Note: Once assigned, this information will be preserved during power down and
the loading of default parameters.
The hardware configuration string is assigned according to the format:
696S...S
where
S...S
hardware configuration string that may contain upto 20 ASCII
alphanumeric characters
Uppercase or lowercase characters are allowed for S...S.
Reader message:
Done
810 Disable Periodic Check Tag (Factory Default)
Command 810 disables the periodic operation of the system check tag.
Reader message:
Done
8110 Perform System Check Tag Test
Command 8110 performs a single system check tag test. It may be executed either in
data or command mode. If the internal check tag option is selected (command 8160),
internal check tag circuitry will emit a single ID that will be acquired and stored by
the reader in the normal manner. If the external check tag is enabled, the reader will
9-47