TransCore SmartPass AI1611, Системное руководство

Страница: 149 / 179

SmartPass® Integrated Reader 2450 MHz (High Voltage) System Guide
46NN Set Wiegand Retransmit Interval
Command 46NN sets the time delay before the reader retransmits Wiegand data of a
tag remaining in the read zone.
where
NN 01–FF seconds where NN is a hexadecimal code from 01–FF
For example, 10 = 16 seconds and FF = 255 seconds. The factory default is 4601 (1
sec).
Uppercase or lowercase characters are allowed for NN (i.e., hex digits A–F or a–f).
Reader message:
Done or Error
48N Select Dual-Frame Processing Mode
Command 48N selects the dual-frame tag processing mode. Dual-frame tags consist
of an A and a B frame. The dual-frame processing mode selected determines which
frame will be used to reset uniqueness (A or B). It also specifies which frame(s) will
be transmitted to the host (A, B, or both). The handshake count for a dual-frame tag
equals the number of A frame handshakes plus the number of B frame handshakes.
where
N = 0–3
0
reset uniqueness on A, transmit A; B frames are counted
and then discarded (factory default)
1
reset uniqueness on B, transmit B; A frames are counted
and then discarded
2
reset uniqueness on A, transmit both A and B
3
reset uniqueness on B, transmit both A and B
Reader message:
Done
If both frames of a dual-frame tag are transmitted to the host, the data will be
formatted as follows:
A...A represents A frame data (20 characters)
B...B represents B frame data (20 characters)
A and B frame data strings are separated by one blank character.
Command 302 can be used to append date and time data, and command 311 can be
used to append auxiliary information.
Examples:
A...A B...B
A...A B...B&HH:MM:SS.hh MM/DD/YY
9-26