TransCore SmartPass AI1611, Системное руководство

Страница: 164 / 179

Commands
where
YYYYYY
is the serial number expressed in decimal digits (0–9), with the
first two digits representing the year
Caution:
All buffered data is lost when command 63 is executed.
Vorsicht:
Alle gespeicherten Daten gehen bei der Ausführung von Befehl 63 verloren.
Precaución:
Cuando se ejecuta el comando #63, se pierden todos los datos almacenados en la
memoria intermedia.
Précaution:
Toutes les données tamponnées sont perdues à l'exécution de la commande 63.
Attenzione:
Tutti i dati nella memoria buffer vanno perduti con l’esecuzione del comando 63.
640N RF Control
These commands directly control the RF module. The
N
value controls the RF
power as follows:
Table 9-14 RF Control Commands
Command RF Power
6400 RF channel off
6401 RF channel on
Either command disables RF-by-input control command 641.
Reader message:
Done
641 Select RF-by-Input Control (Factory Default)
Command 641 configures the reader for RF-by-input control. In this mode, the
reader will automatically turn RF on when it detects a presence through input0. The
reader will turn RF off according to the selected RF control algorithm command
692N.
Reader message:
Done
9-41