TransCore SmartPass AI1611, Системное руководство

Страница: 145 / 179

SmartPass® Integrated Reader 2450 MHz (High Voltage) System Guide
where
HH
represents hours
MM
represents minutes
SS
represents seconds
hh
represents hundredths of seconds
:
is the time delimiter
MM
represents the month
DD represents the day
YY
represents the last two digits of the year
/
is the date delimiter
30N Append Time and Date Selection
These commands select the option of appending the time and date to transmitted IDs,
error messages, presence without tag reports, and input status change reports. The
factory default setting is time and date appended (command 302).
The reader returns an
Error
message if its tag buffer contains data. The reset reader
command 63 may be transmitted to clear the buffer; however, tag ID data will be
lost. If this is unacceptable, allow the buffer to empty before re-issuing append time
and date command 30N.
Table 9-7 Commands selecting Options of Appending Tme and Data
Command Append Option
300 No time and date appended
302 Time and date appended (factory default)
Reader message:
Done or Error
The reader will transmit messages with time and date appended as follows. One
space separates the time from the date.
<string>&<HH:MM:SS.hh MM/DD/YY>
where
string
is a tag ID, error message, or report
&
separates <string> from the time and date
:
is the time delimiter
/
is the date delimiter
9-22