TransCore SmartPass AI1611, Системное руководство

Страница: 128 / 179

Commands
Note: In the following list:
•
Items in bold italics identify factory default settings.
•
Only the data portion of the command number is shown.
•
Only the command-related data portion of the reader message is shown.
•
Refer to Chapter 8, “Communication Protocols,” for the complete syntax of
commands and messages
.
Table 9-2 SmartPass Command List (Ordered by Command Number)
Number Command Name Reader Message
00 Switch to data mode Done
01 Switch to command mode Done
05 Switch to download mode Done
06 Transmit buffer entry Done, Error, or Tag Data
Done = buffer empty
Error = not in buffer control mode
Tag Data = highest priority tag ID
1000 Set baud rate = 110 baud Done or Error
1001 Set baud rate = 300 baud Done or Error
1002 Set baud rate = 1200 baud Done or Error
1003 Set baud rate = 2400 baud Done or Error
1004 Set baud rate = 4800 baud Done or Error
1005 Set baud rate = 9600 baud Done or Error
1006 Set baud rate = 19.2 K baud Done or Error
1010 Use one stop bit Done
1011 Use two stop bits Done
1020 Disable parity Done
1021 Select even parity Done
1022 Select odd parity Done
20S...S Set time
S...S = HH:MM:SS or
HH:MM:SS:hh Done or Error
21S...S Set date
S...S = MM/DD/YY Done or Error
22 Display time and date HH:MM:SS.hh MM/DD/YY
300 Disable time and date append Done or Error
302 Enable time and date append Done or Error
310 Disable aux info append Done or Error
311 Enable aux info append Done or Error
40 Transmit all IDs Done
4100 Select one ID separation Done
4101 Select two ID separation Done
43 Buffer all IDs Done
450 Disable Wiegand mode Done
451 Enable Wiegand mode Done
452 Disable tag translation mode Done
453 Enable tag translation mode Done
9-5