TransCore SmartPass AI1611, Системное руководство

Страница: 159 / 179

SmartPass® Integrated Reader 2450 MHz (High Voltage) System Guide
M1
periodic check tag enabled
T5
periodic check tag interval of 30 minutes (fixed)
551 Display Selected Check Tag Option
Command 551 displays the currently selected check tag option. Refer to commands
8160 and 8161 for more information.
Reader message:
CTAG <0–1>
where
0
internal check tag option enabled (factory default)
1
external check tag option enabled
560 Display Input Status Change Report Options
Command 560 displays the input status change reporting options. Status change
reporting may be disabled by command 82N.
Reader message:
SSTC E<0–1> M<0–3>
where
E0 input status change reports disabled (factory default)
E1
input status change reports enabled
M0
reporting disabled (factory default)
M1
changes on input0 reported
M2
changes on input1 reported
M3
changes on either input reported
For example, if factory default settings are assigned, the reader message is:
SSTC E0 M0
Input status change reports disabled on both input0 and input1
60NN Set Reader ID Number
Command 60NN sets the reader ID that will be sent in the auxiliary data field
(command 311)
Uppercase or lowercase characters are allowed for NN (i.e., hex digits A–F or a–f).
where
NN
00–FF (hex for 0–255)
(factory default = 00)
Reader message:
Done
9-36