Chapter 3
SYSTEM SETTINGS (NX-300 SETTING SOFTWARE)
3-
10. GENERAL SYSTEM SETTINGS
Step 1.
Click the General Settings button on the setup editing screen.
The general settings screen is displayed.
This setting is only possible when an NX-300 unit is detected in the system.
Step 2.
Set each item.
1. Same priority broadcast
Select the preferred operation when a new broadcast with the same priority is made while a broadcast is
currently in progress.
rioriti e rst The ne broadcast is made after the current broadcast is completed.
rioriti e last The current broadcast is automatically terminated, allo ing the ne broadcast to go through.
Note
hen an NX-100 or NX-100S is included in the system, the priority le el is ed at rioriti e rst.
2. Emergency broadcast
The output sound volume can be set to increase when making a broadcast with a control pattern priority
level of 1
(see
p. 3-38,
"
PATTERN SETTINGS
")
.
ON nables d louder broadcasts than those ith priority le els of .
O
roadcasts at the same sound olume as other broadcasts ith priority le els of .
3. NX-100 priority
Sets the priority level of NX-100 broadcasts when NX-100 units are detected in the system. The level is set
to
by default.
Содержание NX-300
