Toa NX-300, Руководство по установке

Страница: 79 / 183

Chapter 3
SYSTEM SETTINGS (NX-300 SETTING SOFTWARE)
3-
[Momentary]
[Latch]
Make
Make
Control input
Control input
Activation Stop
Activation Stop
Broadcast and
control input data
Broadcast and
control input data
Break
Control input
Control input
Break
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
50 ms or more*
50 ms or more*
4. Type
Select the type of control input.
Momentary:
While the input is ON, the designated control pattern is kept activated. The activation stops
when the input becomes OFF.
Latch: If the input is ON, the designated control pattern is activated and this condition lasts even
if the input becomes OFF. If the input becomes ON again, the activation stops.
Note
• hen a broadcast pattern ith the audio source set to Audio ile and the number of repetitions set
to 1 10 is acti ated, the broadcast does not stop until it has completed its designated number of
repetitions, even if the control input is turned OFF.
• hen multiple control inputs are simultaneously set to ON, each control pattern is started at 0 ms
intervals.
• f the start of the control pattern is interrupted, the broadcast ill be uickly terminated at the recei ing
end.
* When the chattering time is set to "Long," its duration is 300 ms or more.
5. Polarity
Select the polarity of the control input.
Make: The closing of the control input is regarded as "ON."
Break: The opening of the control input is regarded as "ON."
6. Chattering time
Set a standby time until the control input becomes stable to prevent the chattering of the control input.
Standard Standard setting duration 0 ms .
Long: Makes the standby time longer (300 ms) than the standard time. Select the long duration if
chattering occurs in standard mode.
7. Control pattern
Designate the control pattern to be activated when the control input turns ON.