Toa NX-300, Руководство по установке

Страница: 81 / 183

Chapter 3
SYSTEM SETTINGS (NX-300 SETTING SOFTWARE)
3-
3. Type
Select the type of control input.
Momentary:
While the input is ON, the designated control pattern is kept activated. The activation
stops when the input becomes OFF.
Latch: If the input is ON, the designated control pattern is activated and this condition lasts even
if the input becomes OFF. If the input becomes ON again, the activation stops.
4. Polarity
Select the polarity of the control input.
Make: The closing of the control input is regarded as "ON."
Break: The opening of the control input is regarded as "ON."
5. Broadcast pattern
Designate the broadcast pattern to be activated when the control input is turned ON. The maximum number
of connection destinations is as follows:
eception 1 location unicast transmission locations multicast transmission locations
Note
Broadcasts to multiple transmission destinations, two-way broadcasts and local broadcasts may not be
made, depending on the broadcast spec settings.
6. Bandwidth (kbps)
Displays the total of bandwidth of the designated broadcast patterns.
[Momentary]
[Latch]
Make
Make
Control input
Control input
Activation Stop
Activation Stop
Broadcast and
control input data
Broadcast and
control input data
Break
Control input
Control input
Break
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
50 ms or more
50 ms or more