Toa NX-300 Скачать руководство пользователя страница 36

Страница: 36 / 183

Chapter 3

SYSTEM SETTINGS (NX-300 SETTING SOFTWARE)

3-1

5.6. Changing the Unit Setting Values Related to the Network

nit setting alues can be changed indi idually.

Step 1.

Click the cell on the detected unit list to be changed.
The unit information list is placed in a mode that allows the unit information list to be input.

Step 2.

Input a new setting value into the unit information list.
Items that can be set are as follows:

•   address
• Subnet mask
•  efault gate ay
•  eb port
•  nit name

Step 3.

Steps 1

and

for all devices to be changed.

Step 4.

After editing

all changes, click the pload settings button.

The new setting values are uploaded to the device.

Note

Since the unit is automatically reset after uploading, the broadcast stops and may be terminated.

Содержание NX-300
























































































































































































Результаты поиска

Содержание NX-300

Отзывы:

Похожие инструкции для NX-300

Бренды по названию

Популярные бренды

Toa NX-300, Руководство по установке

Результаты поиска

Содержание NX-300

Отзывы:

Похожие инструкции для NX-300

Бренды по названию

Популярные бренды