Tidal Engineering Synergy Compact, Техническое руководство

Страница: 237 / 346

Synergy Controller Technical Manual, Revision H Page 237
Page 237
Description Command Usages Command Syntax Range,
Units Command
Example Response Example
ARG3 - Action:
Bit 1 - No Action
Bit 2 - Stop Chamber
Bit 3 - Restart Comms
Bit 4 - Goto Watchdog Setpoints
WDTIMER Query ? WDTIMER ARG1 Shows Watchdog Timer Status
ARG1 - Comm Port
Returns 5 Values
First - Comm Port
Second - WD Timeout in
Seconds
Third - Action 0 - 8
Fourth - State:
0 = normal
1 = WD Alarm
Fifth - Current Idle Timer in
Seconds ? WDTIMER 0 WDTIMER 0 60 4 0 0.0
Digital Output Query
Queries the state of a specific
digital output on the controller.
DO Query ? DO Returns:
Output Number
Mode
0 = On/Off
1 = Time Proportioning
Output
If On/Off Mode
0 - Off
1 - On
If Time Proportioning
0 - 100%
100 - 200% - Inverse another
output
200 - 300% - Mirrored another
output ? DO 1 1: M=0, O=0
RSM_STEADY
Controls the behavior of the
controller in Steady State after a
power failure.
RSM_STEADY Set = RSM_STEADY ARG1 ARG1
0 = Chamber Off
1 = Last Setpoint(s)
2 = Watchdog Setpoint(s) = RSM_STEADY 2 OK
RSM_STEADY Query ? RSM_STEADY Returns:
0 = Chamber Off
1 = Last Setpoint(s)
2 = Watchdog Setpoint(s) ? RSM_STEADY 2