Tidal Engineering Synergy Compact, Техническое руководство

Страница: 127 / 346

Synergy Controller Technical Manual, Revision H
Page 127
♦
Drop down the Drive List to select the drive
as shown at left.
Note: The FlashDisk is the Processor’s internal
Flash memory. The Storage Card is the Synergy
Controller’s SD Flash memory.
♦
Select the desired file from the File List that
appears.
♦
Press the Open button. The Program screen
will open with the listing of your program.
Open the
Run screen to start running your
program. See Section 10 for details.
9.2 Creating a New Program
The
Add Step Wizard is Synergy Controller’s step-by-step guide for adding and inserting program steps.
Each function is defined with on-screen instructions. You may cancel the Add Step Wizard at any time and
return to the main Program screen.
To create a new program, first press the
New File button. If a file is already open, a window
will appear as shown above in Section 9.1 . To add a setpoint step, press the Add Step button
and proceed as shown below in the Add Step Wizard demonstration.
Add Step Wizard Walkthrough:
1. Start

2. Select Add Step or Insert Step
