Tidal Engineering Synergy Compact, Техническое руководство

Страница: 152 / 346

Synergy Controller Technical Manual, Revision H
Page 152
\Logging\Setup Folder Parameters
Enable Logging
Enables and Disables logger.
Note that the logger will always capture message
records even if logging is Disabled.
For example: alarms, profile start/stop, etc.
Logging Interval (Sec) this
parameter sets the
interval between log entries in seconds.
Log File Size (MB)
Maximum log file size.
Note that when the log file reaches this limit the
logger can be programed to stop logging or delete
the oldest records. See the
Options folder.
Log When Chamber Off
Set this parameter to Yes
to log when the chamber is Off otherwise interval
logging will not occur when the chamber is off.
\Logging\Options Parameters
Log Full Behavior
The controller can be
programmed to stop logging or overwrite the oldest
records when log file size reaches the
Log File Size limit.
Enable Usage Warning
parameter controls
whether a warning dialog is generated when the
Full Warning Percentage level is reached.
Full Warning Percentage parameter sets the
Usage Warning percentage.
Profile Storage Warning Level The
controller can
be programed to display a warning when the
number of profiles exceeds this level. Set to 0 to
disable this feature.
Profile Auto-Remove Level
The controller will
automatically remove the oldest records when
number of test results profiles exceeds this level.