Tidal Engineering Synergy Compact, Техническое руководство

Страница: 160 / 346

Synergy Controller Technical Manual, Revision H
Page 160
14.2 Logging Applications
The Synergy Controller/Logger captures and delivers test data for test reports. In addition, the
Synergy Controller logging system is also useful for controller tuning and fault analysis.
14.2.1 Controller Tuning and Troubleshooting
The controller can chart control parameters to provide insight into the performance of PID tuning
and controller settings. The following section explains how to setup the logging system and run a
test to benchmark the system performance for analysis.
As an example, to setup the controller logging system to capture PID tuning information:
Go to the Setup Screen and open the
SETUP \Logging\Setup folder.
Enable Logging Set to Enabled
Logging Interval (sec) set the Logging
Interval to 10 Seconds.
Logging File Size (MB) set from 1.4 MB to
100MB (8MB Recommended).
Log When Chamber Off Set this parameter
to Yes if you want the logger to run all the
time. Note that Profile Logs will only be
generated when the chamber is on and a
profile is running. The Parameter only
applies to the
History file; i.e. the
continuous log.