Thermo Scientific Phadia 100, Руководство пользователя

Страница: 144 / 357

Phadia 100 - User Manual Assay Run Data Evaluation
12-3501-20/12 Page 5.9
2
3
4
5
6
5
Disable Blank Error
There is a possibility to print results when the Blank Check has detected a Blank
Error. This function should only be used under certain circumstances and only
for the following two Blank Errors:
REAGENT BLANK IS TOO HIGH
DARK BLANK IS TOO HIGH
Only disable REAGENT BLANK IS TOO HIGH when you can confirm that the
reagent blank is measured correctly by running a
6.9.5.Run Blanks , see chapter
11, Maintenance.
This function should be used with caution, as blank errors might lead to
unreliable results, see chapter 12, Error Handling.
1.
To disable blank error
handling, press
6
in Print Labo-
ratory Report mode.
2.
Press
yes
.
3.
Select the assay run for
which you want to disable
blank error handling by press-
ing
no
until the assay run ap-
pears, then press
yes
.
Disable Fatal Error
There is a possibility to print results when the instrument has detected one of
the following Processing Errors:
FATAL #52.00 TOO LITTLE WASH LOADED
FATAL #53.00 WASH/RINSE HAVE BEEN MIXED
This function should be used with caution, as these errors might lead to
unreliable results, see chapter 12, Error Handling.
3.2.Print Laboratory Report
6.Specific Run, disable blank error?
3.2.6.Specific Run, disable blank error
Run: (34) 090503 08:57?
3.2.Print Laboratory Report
1.Summary of Runs?
NOTE! It is always the decision of the responsible
laboratory manager to accept an assay run.
Other assay performance parameters have to
be taken into consideration.