Thermo Scientific Phadia 100, Руководство пользователя

Страница: 114 / 357

Phadia 100 - User Manual Assay Run Editing Functions
12-3501-20/12 Page 4.23
3
4
5
6
4
5.2.9.1.Add QC [sIgE]
Range maximum: 0.000
If you are using ImmunoCAP Specific IgE Negative control as quotient, type 0
for Range minimum.
NOTE! If expected mean value, expected standard deviation and maximal
allowed standard deviation have been defined, the Range minimum will be
overridden.
18.
Type the highest allowed
concentration. Type 0 (zero) to
deactivate the function. Press
enter
to confirm this step.
If you are using ImmunoCAP Specific IgE Negative control as quotient, type 100
for Range maximum.
NOTE! If expected mean value, expected standard deviation and maximal
allowed standard deviation have been defined, the Range maximum will be
overridden.
19.
Type the lot number (used
mainly for Phadia controls).
Press
enter
to confirm this step.
20.
If the Quality Control is
prediluted type a dilution fac-
tor between 1-100 (1 is de-
fault). Press
enter
to confirm
this step.
21.
Choose the type of QC
you want, CONCENTRA-
TION, QUOTIENT or
QUALITATIVE, by pressing
no
until the desired type is dis-
played. Then press
yes
.
22.
Type the instrument dilu-
tion factor. Choose between 1,
2, 5, 10, 20, 50 or 100. Press
enter
to confirm this step.
23.
Type a number between
1-99. A low number means that
the Quality Control will be pro-
cessed before Quality Controls
with higher numbers. Type 0
(zero) to use the default order
of the Quality Control. Press
enter
to confirm this step.
5.2.9.1.Add QC [sIgE]
Lot number: 0.000
5.2.9.1.Add QC [sIgE]
Dilution factor: 1
5.2.9.1.Add QC [sIgE]
Type of QC: CONCENTRATION?
5.2.9.1.Add QC [sIgE]
Instr. dilution factor: 1
5.2.9.1.Add QC [sIgE]
Order: 1