TECO-Westinghouse PA7300 Series, Инструкция по установке и эксплуатации

Страница: 51 / 154

2-1
PA 7300 PART II: OPERATION MANUAL
2. SETTING USER CONSTANT
2.1 Frequency command (in Multi-speed operation)
An-
Under the DRIVE mode, the user can monitor the parameters and set their values.
Parameter Name LCD Display (English) Setting Range Setting
*(1, 2)
Factory
*2
Ref
No.
*(3)
Unit Setting Page
An-01 Frequency Command 1 An-01=000.00Hz
Frequency Command 1 0.00 ~ 180.00 Hz 0.01Hz 0.00Hz
An-02 Frequency Command 2 An-02=000.00Hz
Frequency Command 2 0.00 ~ 180.00 Hz 0.01Hz 0.00Hz
An-03 Frequency Command 3 An-03=000.00Hz
Frequency Command 3 0.00 ~ 180.00 Hz 0.01Hz 0.00Hz
An-04 Frequency Command 4 An-04=000.00Hz
Frequency Command 4 0.00 ~ 180.00 Hz 0.01Hz 0.00Hz
An-05 Frequency Command 5 An-05=000.00Hz 2-48
Frequency Command 5 0.00 ~ 180.00 Hz 0.01Hz 0.00Hz 2-49
An-06 Frequency Command 6 An-06=000.00Hz App-3
Frequency Command 6 0.00 ~ 180.00 Hz 0.01Hz 0.00Hz
An-07 Frequency Command 7 An-07=000.00Hz
Frequency Command 7 0.00 ~ 180.00 Hz 0.01Hz 0.00Hz
An-08 Frequency Command 8 An-08=000.00Hz
Frequency Command 8 0.00 ~ 180.00 Hz 0.01Hz 0.00Hz
An-09 Jog Frequency An-09=006.00Hz
Command Jog Command 0.00 ~ 180.00 Hz 0.01Hz 6.00Hz
*1. The displayed “Setting Unit” can be changed through the parameter Cn-20.
*2. At factory setting, the value of “Setting Unit” is 0.01Hz.
*3. The setting of An-01~8 should be with the multi-function terminals 5~8.