Tandberg Data Storage Library T128, Руководство пользователя

Страница: 18 / 192

6 Description
Unused Storage Slots
Each library configuration contains a limited number of slots that are not accessible to the robot.
In any library configuration, the picker cannot access the bottom two slots in each column in the lowest
module in the stack due to the fact that there is not enough clearance at the bottom of the library for the
robotic picker. The slot counts in this
User’s Manual do not include these unusable slots. When bulkloading
the library, do not insert storage or cleaning tapes into the bottom two rows of the lowest module in the
library configuration. For information on bulkloading, see
Bulkloading on page 59.
Front Panel Components
The Tandberg StorageLibrary T128 library is made up of physical hardware components. Figure 4 on
page 6 shows the front panel components of the library. The paragraphs following Figure 4 describe the
components in detail.
Figure 4 Front Panel Components
Access Door
The access door allows access to the internal components of the library. Each control module and
expansion module has an access door. In most cases, you will not need to access the library through this
door except when you want to bulkload or unload cartridges from the library.
The access door is locked by the I/E station door. To open the access door, you must first open the I/E
station door. If you want to prohibit access to the library, which is recommended for security reasons, lock
the I/E station door. This keeps unauthorized users from accessing tape cartridges.