44
Configuring Your Library
All Tandberg StorageLibrary T128 library configurations ship with the purchased number of slots
pre-activated (always a minimum of 36). See
Table 7
on page 44 for the number of default pre-activated
slots available for each library configuration.
After the initial purchase, you can increase the number of usable slots in your library by purchasing a
Capacity-On-Demand (COD) license key. COD license keys come in 46-slot increments. For example, a
14U library could have 82 slots licensed (36 + 46 = 82) at the time of the initial purchase. The remaining 46
slots of the 14U library can be enabled at a later time by purchasing and applying a COD license key. The
full 128 slots would then be enabled and available for use. It is possible to license more slots than are
physically available in the library at the time. In that case, when a 9U expansion module is added, the extra
licensed slots then become available for use.
Table 7
on page 44 shows the available COD slot upgrades
for each library configuration.
For more information about the COD licensed feature, see
Library Features
on page 12. Also, see
Obtaining
a Capacity-On-Demand License Key
below.
You can enter the license key on the
Setup Wizard: Licensing
screen, and you can also use commands
on the operator panel or web client to directly enter a license key at any time after exiting the
Setup
Wizard
.The paths to open the appropriate screens are as follows:
•
From the web client, select
Setup > License
.
•
From the operator panel, select
Setup > Licenses
.
Obtaining a Capacity-On-Demand License Key
All Tandberg StorageLibrary T128 library configurations ship with the purchased number of slots
pre-activated. The number of available pre-activated slots begins at 36 for all library configurations and
increases in 46-slot increments to a maximum of 128 slots in the 14U library configuration. See
Table 7
for
the number of default pre-activated slots available for purchase for each library configuration.
After the initial purchase, you can activate any remaining inactive slots in your library by purchasing a COD
license key. Each license key activates an additional 46 slots in the library. For example, if you purchase a
14U library with only 82 slots of the maximum 128 slots active at the time of purchase, you can later activate
the remaining 46 slots by purchasing a COD license key. (See
Library Features
on page 12 for more
information about the COD feature.)
Table 7
on page 44 shows the number of slots you can activate with a COD license key for each library
configuration
Note
This operation should not be performed concurrently by multiple administrative
users logged in from different locations. You can access the screen, but you
cannot apply changes while another administrative user is performing the same
operation.
Table 7
Activated Slots Per Available Configuration
Library
Configuration
Maximum
Available Slots
Default
Activated Slots
Available
COD Slot Upgrades
5U
36
36
NA
14U
128
36, 82, 128
82, 128
Содержание Storage Library T128
