Tandberg Data Storage Library T128, Руководство пользователя

Страница: 114 / 192

102 Installing, Removing, and Replacing
6 From the front of the library, slide the entire module toward you and lift it off of the module below it.
7 Repeat these steps for each module that you need to remove.
Installing the New 9U Expansion Module
1 Prepare the rack to hold modules, if you want to install your library in a rack. See Installing the
Rackmount Kit on page 138 for instructions on installing a rackmount kit.
2 Remove and replace the cover plates, if appropriate.
a. If you plan to stack the 5U control module at the top of the library, remove the control module’s
bottom cover plate and the 9U expansion module’s top plate.
b. If you plan to stack the 5U control module at the bottom of the library, remove the control
module’s top cover plate and the 9U expansion module’s bottom plate.
*Recommended location for adding an expansion module.
CAUTION
Before removing the control module’s bottom cover plate, the robot
assembly must be parked as described in
Step 5 on page 98.
5U 14U
cover plate
cover plate 5U Control
Module
5U Library
Control Module NEW 9U
Expansion
Module*
cover plate cover plate