manualshive.com logo in svg

Tandberg Data Storage Library T128, Руководство пользователя

Хранилище данных Tandberg Data Storage Library T128 - удобное и надежное устройство для хранения больших объемов информации. Для ознакомления с руководством пользователя вы можете бесплатно скачать руководство на нашем сайте. Посетите manualshive.com для загрузки *бесплатно* вашего экземпляра.

Поделиться
Скачать
background image

78

Updating Library and Tape Drive Firmware

If you are using the web client to complete the process, select 

View I/E Stations

 to verify that the 

scratch tape is in the top slot of the I/E station. (Selecting 

View I/E Stations

 opens the 

Library 

Configuration Report

. See 

Viewing the Library Configuration

 on page 69 for more information on this 

report.)

8

Select 

Apply

. 

A message notifies you when the operation is complete. The library returns the FUP tape to the topmost 
I/E station slot. 

9

Remove the FUP tape from the I/E station. 

The paths to open the appropriate screens are as follows: 

•

From the web client, select 

Tools > Drive Operations

.

•

From the operator panel, select 

Tools > Drive Management

.

For more detailed, step-by-step instructions, see your library's online Help. To access the online Help 
system, click the 

Help

 icon at the top right of the web client or operator panel user interface.

Using a FUP Tape to Update Tape Drive Firmware

You can update tape drive firmware using a FUP tape. A FUP tape contains a specific version of tape drive 
firmware and is used to transfer the firmware to one or more tape drives within the library. Update firmware 
on all of the drives in the library at the same time to make sure that all of the drives are at the same firmware 
level. Having different levels of drive firmware in the library is not recommended. 

The Tandberg Data Support website at www.tandberg.com provides information that can help you to verify 
that the library is running the appropriate level of tape drive firmware, compatible with the tape drive type.

You cannot use a SCSI FUP tape to update tape drive firmware on a FC tape drive and vice versa. Each 
tape drive interface type requires unique firmware. See 

Creating a FUP Tape

 on page 75 for more 

information on FUP tapes and how to create them. 

If the affected partition is online, it will be taken offline before the firmware update operation is performed, 
and brought back online after it is completed. You will be asked to confirm that you want to take the partition 
offline.

The entire process of updating tape drive firmware with a FUP tape can be performed using the operator 
panel. If you choose to perform the operation using the web client, be aware that part of the process must 
be performed on the operator panel and that you will need access to the physical library.

Note

Do not attempt to open the I/E station door during this operation. If you open 
the I/E station, the FUP tape erasure operation will fail.

Note

If a 

Failure

 message appears, the operation did not complete successfully. 

Follow instructions listed on the screen to resolve any issues that occurred 
during the operation.

CAUTION

Before you update tape drive firmware, make sure that cartridges are 
not loaded in any tape drives. If cartridges are loaded in tape drives 
during the update process, the library loses knowledge of the 
cartridges' storage slot location, resulting in library and host 
application inventory issues.

Содержание Storage Library T128

































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Storage Library T128

R/Evolution 2000 Series Getting Started Manual preview
2000 Series
Бренд: R/Evolution Страницы: 58
DataLocker IronKey EMS H350 Enterprise User Manual preview
IronKey EMS H350 Enterprise
Бренд: DataLocker Страницы: 23
KREAFUNK wiTRAY CARE Operation Manual preview
wiTRAY CARE
Бренд: KREAFUNK Страницы: 34
IBM Deskstar 14GXP Quick Installation Manual preview
Deskstar 14GXP
Бренд: IBM Страницы: 2
AMX NXA-WC80211G-CF Installation Manual preview
NXA-WC80211G-CF
Бренд: AMX Страницы: 6
SAJ HS2/AS2 Series User Manual preview
HS2/AS2 Series
Бренд: SAJ Страницы: 43
INOVU CHROME BOX 2.5 L User Manual preview
CHROME BOX 2.5 L
Бренд: INOVU Страницы: 30
QNAP TS-130 User Manual preview
TS-130
Бренд: QNAP Страницы: 39
IBM SAN768B Installation, Service And User Manual preview
SAN768B
Бренд: IBM Страницы: 208
Sony USM8GM Operating Instructions preview
USM8GM
Бренд: Sony Страницы: 2
Sony USM4GR Operating Instructions preview
USM4GR
Бренд: Sony Страницы: 2
Sony USM4GL Instruction & Operation Manual preview
USM4GL
Бренд: Sony Страницы: 2
Sony USM4GM Operating Instructions preview
USM4GM
Бренд: Sony Страницы: 2
Sony USM512H Operating Instructions Manual preview
USM512H
Бренд: Sony Страницы: 8
Life Fitness SMSS-ADD Owner'S Manual & Assembly Instructions preview
SMSS-ADD
Бренд: Life Fitness Страницы: 30
Promise Technology VessRAID 1740s Product Manual preview
VessRAID 1740s
Бренд: Promise Technology Страницы: 324
Solid s7722 Manual preview
s7722
Бренд: Solid Страницы: 28
PQI USB Flash Drive Specifications preview
USB Flash Drive
Бренд: PQI Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды