manualshive.com logo in svg

Tandberg Data Storage Library T128, Руководство пользователя

Поделиться
Скачать
Tandberg Data Storage Library T128 Скачать руководство пользователя страница 78

66

Running Your Library

For step-by-step procedures, see the library’s online Help. To access the online Help system, click the 

Help

 

icon at the top right of the web client or operator panel user interface.

Manually Cleaning Tape Drives

The 

Clean Drive

 screens on the operator panel user interface allow administrative users to manually clean 

tape drives. 

The 

Clean Drive

 screens allow you to select the tape drive that you want to clean. You are then prompted 

to insert a cleaning cartridge in the topmost I/E station slot and select 

Apply

. The library then takes the 

associated partition offline, moves the cleaning cartridge from the I/E station slot to the designated tape 
drive, and cleans the tape drive. 

When the operation is complete, the library moves the cleaning cartridge back to the I/E station slot and 
takes the partition back online.

Manually cleaning tape drives can be performed only from the operator panel. The path to open the 
appropriate screen is as follows:

•

From the operator panel, select 

Tools > Drive Mgmt > Clean Drive

.

Locking and Unlocking the I/E Stations

Each 5U control module and 9U expansion module has an I/E station door with multiple open and close 
sensors. A secondary door located behind the I/E station door acts as a redundant indicator as to whether 
the I/E station is opened or closed. When you are finished accessing the I/E station, make sure the station 
door is fully closed.

Administrative users can use this operation to lock or unlock the doors for all I/E stations that are configured 
as I/E station slots. If all I/E station slots are configured as storage, this operation unlocks the control module 
I/E station only. 

There are three reasons the I/E station door locks: 

•

The library imports or exports a cartridge from the I/E station door. 

While the library is attempting to import or export a tape from a given I/E station slot, only the 
associated I/E station door is locked in the closed position. All other I/E station doors remain 
accessible. On a get from an I/E station slot, the associated I/E station door remains locked until 
the media has been successfully moved to its destination. This allows the media to be returned to 
the I/E station slot in the event of a put error. 

Note

Be sure to unload the tape drive before attempting to clean it. If the tape drive is 
loaded with a cartridge, it will not available for this operation. 

Note

If your library has zero I/E station slots, you will not be able to manually clean 
tape drives. See 

Configuring I/E Station Slots

 on page 40.

Note

Some host applications use a command to lock and unlock I/E station doors. 
This command usually cannot be overridden by the library. Use the host 
application to lock or unlock I/E station doors if this occurs. Using the library 
lock/unlock operation may affect the host application. See your host application 
documentation for information.

Содержание Storage Library T128

































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды