Tandberg Data Magnum 224, Руководство по эксплуатации продукта, Страница: 99 / 278

A
UGUST
2007 M
AGNUM
224, S
TORAGE
L
IBRARY
T24,
OR
S
TORAGE
L
OADER
2U
81
4
U
SING THE
R
EMOTE
M
ANAGEMENT
U
TILITY
The library’s Remote Management utility allows you to set configuration
options, view library and tape drive information, and monitor operation
across an Ethernet network. You can access the Remote Management utility
using a standard web browser.
This chapter explains how to access the Remote Management utility and
describes the configuration options and information available through the
utility. If you plan to use the utility, refer to this chapter in conjunction with
Chapter 3 – Configuring the Library .
A
CCESSING THE
R
EMOTE
M
ANAGEMENT
U
TILITY
To access the library’s Remote Management utility:
1. 1. 1. 1. Connect the library to your Ethernet network as described on page 21 .
2. 2. 2. 2. If not already powered on, power on the library as described on page 22 .
3. 3. 3. 3. Use the library’s operator panel to set up the Ethernet interface as
described on
page 63 . Make a note of the library’s IP address.
Note: If you set DHCP on, you can view the current server-assigned IP
address for the library through the Status menu (see
page 137 ).
NOTICE–The functions described in this chapter are subject to change.
To view this information... go to...
Home Page Viewing the Home page page 83
Configuration Setting Configuration options page 91
Statistics Viewing information on the Statistics page page 100
Tools Using the Utility’s Tools page 103