Tandberg Data Magnum 224, Руководство по эксплуатации продукта, Страница: 149 / 278

A
UGUST
2007 M
AGNUM
224, S
TORAGE
L
IBRARY
T24,
OR
S
TORAGE
L
OADER
2U
131
C
LEANING THE
T
APE
D
RIVE
U
SE THE
L
IBRARY
’
S
A
UTOCLEAN
F
UNCTION
Set up automatic tape drive cleaning during library configuration, and store a
cleaning cartridge in the library. See
page 59 for information about setting up
automatic tape drive cleaning.
U
SE YOUR
B
ACKUP
A
PPLICATION
’
S
C
LEANING
O
PTION
Set the cleaning option in your backup application (if available) so that the
software monitors tape drive cleaning requirements and automatically cleans
the tape drive(s) using a cleaning cartridge stored in the library. Refer to your
software documentation for information about setting this option.
C
LEANING A
T
APE
D
RIVE
U
SING THE
C
LEAN
D
RIVE
O
PTION
Use the front panel Clean Drive option to clean the tape drive(s) when the
library or backup application notifies you to do so. When you select the Clean
Drive option, the library loads the cleaning cartridge into the tape drive, waits
until the cleaning is finished, unloads the cleaning cartridge, returns it to its
cell, and resumes normal operation.
Before using the Clean Drive option, make sure that you have turned the Auto
Cleaning option OFF (see
page 61 ).
If the fixed
cleaning slot is... The library...
Enabled attempts to load a cleaning cartridge from the fixed
cleaning cell
Disabled looks for a cleaning cartridge in the I/E port
Once the cleaning cycle is complete, the cartridge
will be returned to its original element (fixed cell or
I/E port)