Tandberg Data Magnum 224, Руководство по эксплуатации продукта, Страница: 108 / 278

90
P
RODUCT
M
ANUAL
1017472
C
HAPTER
4—U
SING THE
R
EMOTE
M
ANAGEMENT
U
TILITY
Slots –Addresses 1 through 24 represent magazine slots for the Magnum 224
and StorageLibrary T24.
Addresses 1 through 20 for the StorageLoader 2U LTO.
The slot numbers begin with the right magazine and continue with the
left magazine.
The storage cells decrease or increase based on the I/E Port setting
(enabled or disabled). Disabling the I/E Port increases the storage cell
count. See
“Enabling and Disabling the I/E Port” on page 45 .
Tape Drives –The addresses for the tape drives are defined as follows:
Type: Number
This indicates the type of the address (I/E port, slot, or tape
drive).
Status This indicates the status (POVA) of the address, as follows:
Label Valid Indicates whether the bar code label information for the element
is considered valid (1) or questionable (0). The bar code label information is
considered questionable if the library had a problem reading the label.
Label If the element contains a cartridge, this field provides the bar code
label information for the cartridge. If the cartridge does not contain a bar code
label, it shows the cell number (the same as the address).
This field also indicates the type of data cartridge (L1=LTO1, L2=LTO2,
L3=LTO3, and L4=LTO4).
Table 5-1 on page 115 provides data cartridge
compatibility.
Tape drive style Location Element Address
Single full height Default 81
Second half height Top 82
Single half height Bottom 81
Letter or Number Definition
“P” Slot Present
“O” Slot Occupied
“V” Slot Occupied and Valid
“A” Slot Accessible
1 Yes
0 No