Tandberg Data Magnum 224, Руководство по эксплуатации продукта, Страница: 82 / 278

64
P
RODUCT
M
ANUAL
1017472
C
HAPTER
3—C
ONFIGURING THE
L
IBRARY
Enabling Network Addressing and Setting the Ethernet Addresses
To enable or disable Network addressing:
1. 1. 1. 1. At the Home screen, press Lib .
If necessary, enter the operator panel password (see page 75 ).
2. 2. 2. 2. Press until the selection arrow ( ) points to Library Settings .
SNMP If you are using a network-based monitor/management
application other than the library’s Remote Management utility,
you may need to identify the library’s Simple Network
Management Protocol (SNMP) settings to the application. These
settings include:
ƒ
Read community string
ƒ
Write community string
ƒ
Broadcast community string
ƒ
Trap address
ƒ
Trap port
You can view and change these settings only through the
library’s Remote Management utility. See
Chapter 4 for
instructions.
FTP Interface The library also includes an FTP interface that you can use to
transfer firmware files or create diagnostic listings. You can:
ƒ
Set up an FTP user name and password for this interface or
use the library’s defaults
ƒ
View and change the FTP settings only through the library’s
Remote Management utility
ƒ
For instructions, see Chapter 4 .
For information about accessing the library’s FTP interface and
using an FTP utility to upgrade firmware or obtain diagnostic
listings, see
page 183 .
Library
Library ID
Inventory
Password
X
Select Language
Library Settings
Select Back
Table 3-7
Ethernet configuration options (continued)