Tandberg Data Magnum 224, Руководство по эксплуатации продукта, Страница: 113 / 278

A
UGUST
2007 M
AGNUM
224, S
TORAGE
L
IBRARY
T24,
OR
S
TORAGE
L
OADER
2U
95
S
ETTING
C
ONFIGURATION
O
PTIONS
Control (operation mode) —You can operate your library in either Random
mode or Sequential mode.
You can also set the restart and loop options as follows:
Restart option—Determines what the library does after it is reset, power
cycled, or when a magazine has been re-inserted.
Loop option—Determines what the library does after it has finished
processing the last cartridge in the sequence.
Mode Description
Random
(the default)
Use this mode with an application that controls the library.
Sequential Only use this mode if you plan to operate the library without
a backup application. In Sequential mode, the library
automatically processes cartridges in sequential order
without direction from an application. See
page 55 for
information about setting the library to operate in
Sequential operation from the front panel.
!
Important If you are using a backup application which is capable of
controlling the library, do
not configure the library to
operate in Sequential mode.
Mode Description
Enabled The library restarts at the beginning of the cartridge
sequence.
Disabled The library resume where it left off when the
interruption occurred.
Mode Description
Enabled The library loops back to the first cartridge in the
sequence and begins processing the cartridges again.
Disabled The library stops and waits for operator intervention.
Operator intervention typically means removing
cartridges for storage and inserting new cartridges.