Tandberg Data Magnum 224, Руководство по эксплуатации продукта, Страница: 142 / 278

124
P
RODUCT
M
ANUAL
1017472
C
HAPTER
5—O
PERATING THE
L
IBRARY
I
SSUING A
R
E
-
INVENTORY
C
OMMAND TO THE
L
IBRARY
Under normal circumstances, you should never have to issue a Re-inventory
command to the library. The library automatically updates the inventory each
time you power the unit on, reset the library from the front panel, and open
and close an I/E Port or a magazine. If desired, you can issue this command to
verify that the inventory shown on the display is correct.
To re-inventory the library:
1. 1. 1. 1. At the Home screen, press Lib .
If necessary, enter the operator panel password (see page 75 ).
2. 2. 2. 2. Press until the selection arrow ( ) points to Inventory .
3.
3. 3.
3. Press
Select
.
4.
4. 4.
4.
Press until the selection arrow ( ) points to Re-Inventory .
5.
5. 5.
5.
Press Select .
! ! ! !
Tip
Cartridges with bar code labels require much less time to scan than
cartridges without bar code labels. We recommend applying bar code
labels to each cartridge, including the cleaning cartridge.
Library
Library ID
Inventory
Password
Select Language
Library Settings
Select Back
Inventory
View Slots
View Drives
View I/E Ports
Re-Inventory
Select Back