Tandberg Data Magnum 224, Руководство по эксплуатации продукта, Страница: 147 / 278

A
UGUST
2007 M
AGNUM
224, S
TORAGE
L
IBRARY
T24,
OR
S
TORAGE
L
OADER
2U
129
C
LEANING THE
T
APE
D
RIVE
Auto cleaning enabled—The library does not display this message if Auto
Cleaning is enabled and a cleaning cartridge is in the fixed cleaning cell. In
this case, the cleaning is done automatically (see
“Setting Up Automatic Tape
Drive Cleaning” on page 59 ).
You can clean the tape drive(s) in several ways:
C
HECK THE
C
LEANING
C
ARTRIDGE
S
TATUS
Before cleaning the tape drive, verify that the cleaning cartridge in the library
is not depleted.
Notes: The cleaning count information is stored in the cartridge, so it must be
used once to “start” the count. Until it is used the first time, the library
displays an “unknown” (Remote Management Utility) or “no data
available” (front panel) status.
If there is no barcode label on the cleaning cartridge, a power cycle causes
the cleaning count information to be lost. If there is a barcode label on the
cleaning cartridge, the library stores the information and recognizes it after
a power cycle.
To view the status of the cleaning cartridge after it has been used:
1. 1. 1. 1. At the Home screen, press Maint .
If necessary, enter the operator panel password (see page 75 ).
Caution
Do not use any cleaning method other than the LTO Cleaning Cartridge. Using
other cleaning methods will void your warranty.
Carefully follow all instructions and recommendations provided with the cleaning
cartridge. Do not rewind and reuse the material in a cleaning cartridge. Reusing
the material may redistribute contaminants previously removed from the tape
path. If all of the cleaning material has been used, discard the cartridge and use a
new cleaning cartridge.
To view this information... go to...
Use the library’s Autoclean function
page 131
Use your backup application’s cleaning option
Use the front panel Clean Drive option