Tandberg Data Magnum 224, Руководство по эксплуатации продукта, Страница: 93 / 278

A
UGUST
2007 M
AGNUM
224, S
TORAGE
L
IBRARY
T24,
OR
S
TORAGE
L
OADER
2U
75
S
ETTING
C
ONFIGURATION
O
PTIONS
This screen shows an example of a password using upper and lower case
letters and numbers.
8. 8. 8. 8. Press Done to accept the change, or press Back to reject the change.
Once you enable the password, a padlock icon appears in the upper right
screen to show that the operator panel is password protected.
9. 9. 9. 9. Press Back (as needed) to return to the Home screen.
When password protection is in effect, you must enter the password before
you can use the operator panel menus. Each time you return to the Home
screen and press a different button, password protection is re-activated; you
must enter the password again to access the menus.
Accessing password protected operator panel menus
If you need to gain access to the operator panel menus, but want password
protection to remain in effect, follow these steps:
1. 1. 1. 1. At the Home screen, press the mode you need to access. The following
screen appears.
2. 2. 2. 2. Enter the operator panel password by following the steps on page 74 .
Password
CATinHAT123
Done Back
TANDBERG DATA
Lib
D-2
D-1 :
:
: Idle
No Tape
No Tape
Move Lib Maint Drive
Confirm Password
AAA
Done Back
+
+