Tandberg Data Magnum 224, Руководство по эксплуатации продукта, Страница: 155 / 278

A
UGUST
2007 M
AGNUM
224, S
TORAGE
L
IBRARY
T24,
OR
S
TORAGE
L
OADER
2U
137
6
V
IEWING
L
IBRARY
I
NFORMATION
The library maintains an internal database containing extensive information
about its configuration and operations. This information is available through
the front panel. During day-to-day operation, you typically do not need to
access this information. However, if you need to contact Tandberg Data
Technical Support about your library, you may be asked to check and report
back on various settings and event results.
This chapter explains how to view the following information.
V
IEWING
B
ASIC
L
IBRARY
I
NFORMATION
Because the library communicates with the host through the SCSI interface of
the tape drive(s) via the ADI serial interface, the SCSI interface seen by the
host is the SCSI interface (SCSI ID) of the tape drive.
To view this information... go to...
Library information – library type, serial number, and SCSI ID below
Library status – fans, cable, and temperature page 139
Library history – event logs page 140
Library statistics – view slots, drives, and I/E port page 143
Library settings – emulation mode, operation mode, ethernet,
I/E port, and the display and storage settings page 146
Tape drive information –
ƒ
SCSI tape drive–serial number, SCSI ID, and type, and the
tape drive designated as the SCSI interface (bridge)
ƒ
FC tape drive–NPort Address, Loop ID, Port number, and
WWNN number
page 148
Cartridge inventory page 153