Tandberg Data Magnum 224, Руководство по эксплуатации продукта, Страница: 217 / 278

A
UGUST
2007 M
AGNUM
224, S
TORAGE
L
IBRARY
T24,
OR
S
TORAGE
L
OADER
2U
199
B
ACKUP
S
OFTWARE
R
EPORTS AN
E
RROR
The backup software has attempted to append data to a cartridge that
previously failed. If a write media error previously occurred on the tape, the
tape drive cannot append data at the point where the write media error
occurred. You can attempt to overwrite the tape, but any attempt to append
data will fail.
If you are trying to write data, the cartridge may be write-protected. Check
the switch on the edge of the cartridge (see
Figure 5-2 on page 115 ).
Use a pen or small screwdriver to move the switch. Do not use a pencil,
because graphite may corrupt the tape.
If you used an application other than your normal backup software to write
data to the tape, your backup software may report that it does not recognize
the tape. For example, if you have used LTO Tool to write and read test data,
the test tape will not be “recognized” by your backup software. Perform a tape
erase using either LTOTool or your backup software.
B
ACKUP
S
OFTWARE
C
ONFIGURATION
I
SSUES
If you suspect an issue with the backup software configuration, use LibTool
and LTOTool to first confirm that the library and tape drive are working
properly. Download and install LibTool and LTO tool from
www.tandbergdata.com .
Note: LibTool may return an error message with some tape drives, but still
returns the requested information.
The readme file that accompanies the program (or the online help for the
Windows version) provides instructions for using LibTool and LTOTool.
For any questions regarding software configuration, contact your software
provider.
If the switch... the tape is...
does not cover the opening write-enabled
covers the opening write-protected
Use LibTool to
Detect the library
View the library’s cartridge inventory
Move tapes into and out of the tape drive
Use LTOTool to
Detect the tape drive
Perform a Read/Write test