Tandberg Data Magnum 224, Руководство по эксплуатации продукта, Страница: 40 / 278

22
P
RODUCT
M
ANUAL
1017472
C
HAPTER
2—I
NSTALLING THE
L
IBRARY
2. 2. 2. 2. Connect the other end of the cable to the network or directly to the server
you plan to use to run the library’s Remote Management utility or to
upload firmware.
See Chapter 7, “Maintenance for information about downloading firmware
and performing diagnostics.
P
OWERING
O
N THE
L
IBRARY
This process involves two steps:
Applying Power to the Library (below)
“Removing the Shipping Lock” on page 23
A
PPLYING
P
OWER TO THE
L
IBRARY
To power on the library:
1.
1. 1.
1.
Make sure that the power switch on the back of the library is off (the 0 is
pressed).
! ! ! !
Important
You must remove the shipping locks before operating the
library.
Figure 2-10
Shipping locks
Figure 2-11
Power switch and power connector
Left lock
Lock
Right lock
handle
Lock
handle
0
Power switch
(off =
0 )
Power
connector