Tandberg Data Magnum 224, Руководство по эксплуатации продукта, Страница: 150 / 278

132
P
RODUCT
M
ANUAL
1017472
C
HAPTER
5—O
PERATING THE
L
IBRARY
The Clean Drive option allows you to select any slot/cell as the source for a
cleaning cartridge, including an I/E Port. Determine the location of your
cleaning cartridge, and then proceed.
When a tape drive requires cleaning:
1. 1. 1. 1. At the Home screen, press Maint .
If necessary, enter the operator panel password (see page 75 ).
2. 2. 2. 2. Press until the selection arrow ( ) points to Cleaning Options .
Cleaning
Cartridge Condition Description
Not stored in
library
Cells all occupied Use the Export command to remove a
cartridge from the library, as described
on
page 122 . Before closing the I/E Port
door, insert the cleaning cartridge.
Cells not all occupied Load the cleaning cartridge into an
enabled I/E Port, and then select it as
the “source” in Step 4 below.
Stored in
library I/E Port enabled Store in Slot/Cell 2
I/E Port disabled Store in Slot/Cell 1
Maintenance
Library Maintenance
Drive Maintenance
Cleaning Options
System Reset
USB Options
Select Back