Tandberg Data Magnum 224, Руководство по эксплуатации продукта, Страница: 186 / 278

168
P
RODUCT
M
ANUAL
1017472
C
HAPTER
7—M
AINTENANCE
Second Half height tape drive : Install the tape drive in the upper opening.
Serial
—Route the serial cable (
S
) over the tape drive carrier and under the
power cable; connect as shown in Figure 7-2 (HH serial cable routing).
Power —Route the power cable under the tape drive carrier as shown here;
connect as shown in Figure 7-4 (HH power cable routing).
Single Half height tape drive : Install the tape drive in the lower opening,
and use the middle power connector (
P
).
Serial —Route the serial cable (
S
) over the tape drive carrier and under the
power cable; connect as shown in Figure 7-2 (HH serial cable routing).
Power —Route the power cable under the tape drive carrier as shown here;
connect as shown in Figure 7-4 (HH power cable routing).
d. d. d. d. Slide the tape drive the remaining distance into the library. Use care not
to damage the cables during this step.
Figure 7-10
Upper half height tape drive cable routing
Serial cable ( S )
Tape drive
(route over
carrier and
under the
power cable)
carrier
Press the serial cable ( C ) down into the
carrier to prevent catching it between
the tape drive and the library.
Power cable ( P )
(route under carrier
and over serial cable)
Figure 7-11
Lower half height tape drive cable routing
Serial connector ( S )
Power cable ( P )
Second half
height power
connector (do
not
use with only one
HH tape drive
installed)
(use middle connector)
Route both cables
over tape drive
carrier
(route under power cable)